Pages
Categories
Blogroll
-
Random shots from our Galleries
Archives
- February 2012 (1)
- August 2011 (5)
- July 2011 (2)
- April 2011 (2)
- December 2010 (1)
- October 2010 (4)
- September 2010 (2)
- June 2010 (4)
- May 2010 (2)
- April 2010 (3)
- March 2010 (9)
- February 2010 (11)
- January 2010 (5)
Visitors







The Ozzy Archive
-
The Ozzy – Bat tail and fins
Well, I decided to stick with my original concept and go with a bat tail and sharply raked fins on this board. After all that’s how it got its name….
-
The Ozzy PP – Planshape cut out
I cut out the plan shape in preparation for the top deck to go on. Once that is complete its on to the rail shaping marathon!
-
The Ozzy – Three of four layers in place
I now have the bottom deck and the two inner layers in place. As with the Mini Pintail, I will cut the board shape out of these layers before I…
-
The Ozzy – Gluing up the first deck panel
Got the first deck panel glued up finally. I decided to use the CA glue as an assistant in this case but in the long run It wasn’t really necessary…
-
The Ozzy – Internal frames are done
This board is going together like a dream. I’ve got both internal frames “pre-glued” with CA instant glue. The second frame went together in less than an hour using only…
-
The Ozzy – gluing up frames with CA
As I mentioned before I am using CA instant glue to glue up the frame as I cut each piece. I hope this works out well because I am really…
-
The Ozzy
This will be another parallel profile board. It is still in the infant stages so far and I haven’t even gotten a photo of it yet. There are a couple of…
